You path:  Home >> NEWS >> Led lampa E14, E27, E40 and G1...
Led lampa E14, E27, E40 and G13. Differences and features
Mike  2012-08-02 15:17:11  

LED lampor, such as E14, E27, E40 and G13, developed specifically under the existing standards of coverage, with reduced power consumption and heat generation. The structure of LED E27, as well as other lamps of this type include:


AC adapter (converter), built directly into the lamp;
Board with powerful LEDs;
Bright glow of continuous light output is the result of the passage of current through
a semiconductor. This phenomenon is the basis of the LED lampa. In turn, aluminum housing, which are components of the lamp, promotes abstraction of heat and prolong the life of the whole structure.


LED light sources, such as LED lampor E14, E27, E40 and G13, more efficient standard incandescent bulbs.
LED  lamps with E40 socket designed for installation into standard fixtures of street and industrial lighting.

 

E40 LED lampor immediately switched on the light without flickering lamp power consumption ranges from 21 to 50 watts.


All LED lampor (LED lampa E14, E27, etc.) have built-in converter that allows you to connect directly to the lamp to AC 220V. Often LED lampa bulbs E14, E27 used as lighting for homes and businesses. For the application of LED lamp socket E40, in fixtures series HCS or CGS to connect the power supply 220 directly, and the lamp ballast (ballast) is extracted.


High reliability, better lighting performance, full environmental safety, low power consumption, long service life - these are indisputable advantages which distinguish the new series of LED lamps from conventional fluorescent and incandescent lamps.


Special efficiency LED bulbs are different E14 and E27. Even after six months operation of high efficiency light diode and a minimum consumption of electricity worth the price of the LED light source.
G13 LED bulb is used to replace fluorescent lamps. G13 LED lampor are used in standard fixtures such as LPO, LVO, LSP, and others, with base G13 as an alternative to fluorescent lamps at 18, 20, 36, 40, 80, Tues


When replacing the G13 to LED lampor do not need starters, ballasts and other ballast. G13
lamps do not require special disposal as opposed to fluorescent light sources.
Electricity consumption LED lampor G13 is significantly lower than fluorescent. And their life is not less than 50 thousand hours, or more than 5 years of continuous operation!


These lamps are well suited for lighting in residential and industrial premises, shops and offices, and advertising media.

[Print]  [Close]  

Copyright© Shenzhen Longtech Electronics Co., Ltd    led t8 tubes light, t8 led tube light,  t8 led tube lighting, led t5 tube light, led tube lights t5, t5 led tubes light, t10 led tube lights, t10 led tubes light Sitemap    LED Tube light,LED Tube lamp,LED Tube Light Manufacturer  

 
 
2503564770
 
375737297
 
ete6688523
 
点击这里给我发消息
 
点击这里给我发消息